The HydraCal direct force calibration system allows for a weighing vessel or silo to be fully calibrated in the fraction of the time taken using flowmeter or weighbridge calibration methods.
This revolutionary, proven technique can be carried out easily on any weigh vessel with suitable jacking points fitted at each load cell location. There are two methods that can be used depending on the suitability and type of the vessel;
Reverse Calibration Our HydraCal system is used to push a known amount of weight off a full or partially full system. We jack the system in multiple, measured intervals back to zero enabling us to check the overall system accuracy, the system linearity and repeatability. This method can often be carried out without the need to modify your existing system as most systems already have a suitable jacking point at each load cell. This is particularly good on bulk storage silos which are rarely emptied.
Force Calibration With the correct brackets in place, we can use our HydraCal system to apply a measured force down onto a weighing vessel allowing our engineers to calibrate the system in multiple intervals, often up to the full scale of the weighing system.
Either of the above techniques are quick and simple once the calibration system is positioned. This means that the downtime of the vessel is kept to a minimum ensuring less production schedule problems.
Benefits of Direct Force Calibration:
• True traceable calibration over multiple points
• Can be carried out with product in the vessel
• Cost effective with amazing savings over traditional methods
• Simple and quick operation once positioned
• Can use existing vessel jacking points
• Fully traceable calibration with certificate issued as standard
• ATEX approved for use in hazardous areas
• Calibration accuracy to within 0.1%
An EN ISO 9001 Company Cert. No 244
Head Office: Unit 5, Southview Park, Marsack Street, Caversham, Reading - RG4 5AF. England.
Telephone: 0118 946 1900 Fax: 0118 946 1862 Email: sales@appliedweighing.co.uk
